The BLE beacon reader will scan all the BLE beacon signal and report the specific format for the user's applications.
Long Range: available for C5 model, supports coded PHY beacon type
Customization design service: Packet filtering, report data format, default setting, etc..
Specifications:
1. COM port: 9,600 or 115,200 bps, 8 data bits,One stopbit,None parity,w/o flow control
2. Range: 50m radiud in open space or 20m radius indoor, Lonr range type will cover hundreds meter range
3. Bluetooth BLE V5.x
4. RS-232 Interface: D_SUB 9-pin Male
5. Frequency: 2.400 to 2.4835 GHz
6. Tx. Power: Max. 4~20 dBm (depend on the model)
7. Rx. Sensitivity: -89~-106.7 dBm typical (depend on the model)
8. Power Supply: 5~40 VDC, 1A Max
9. Current Consumption: up to 30 mAh
10. Operation Temperature: –40 °C to +85 °C
11. Antenna Gain: max. 2 dB
12. Dimensions: 90 mm (L) x 35 mm (W) x 18 mm (H) (Internal antenna type)
13. External antenna length: 88mm w/o folderable SMA connector(20mm)
BLE Beacon filter: iBeacon, Eddystone, AltBeacon, Uconnect All DIP switch is “0” by default.
Tag type is "1": Uconnect Tag
Tag type is "2": iBeacon
Tag type is "3": Eddystone
Tag type is "4": Altbeacon
Remark: The adapter support several kinds of beacon format, please check the user manual.
Example:
$1,00A05053849D,1,00A050172A2C,30,0,0,,-71#
$2,00A05053849D,0,58E72F0CEF88,0,0,0,0,-48#
$3,00A05053849D,0,772BB24ADC36,0,0,0,0,-48#
$4,00A05053849D,0,012AC345EB45,0,0,0,0,-49#
DIP No. 1 is set to “1” (On): Raw packet data Prefix: “$” Raw packet data is between “$” and “CR” Suffix: Carriage Return Example:
$1EFF0600010920008DC8BE90AEB3B032E0B9F89A0CCED9FFFAE3BDBFB2DB75 $0201061BFF570100F8398F0A43BE1D146A75669AC8FB3A7601E1917E545CAB $1EFF0600010920008DC8BE90AEB3B032E0B9F89A0CCED9FFFAE3BDBFB2DB75 $1EFF060001092000111B6E4CE83EB1E445E8B104838CB749E14A8BE404CB4A
Default: All pin is “0”, Baud rate 9,600 bps., 8 Data bits, None parity, 1 Stop bit.
DIP No. 9 is set to “1” (On): The baud rate is 115,200 bps, 8 Data bits, None parity, 1 Stop bit.
Package Contents:
1. BLE V5.x RS-232 Beacon Reader x 1
2. Mini or type C USB power cable x 1 (depend on the model)
3. User manual x 1
4. Dipole antenna x 1, 2 or 5 dBi (Depend on the model)
